Rod Mill

【Introduction】:A grinding equipment with steel rod as medium

【Capacity】: 0.62～250t/h

【Improvement】: Xinhai rod mills include overflow rod mill, end peripheral discharge rod mill and center peripheral discharge rod mill, which could meet different requirement.

Consult

Leave Message

yding@xinhaimining.net

Advantages
Product Structure
Technical Parameters
Successful case

【Advantages】

The steel rod takes regular movement in mill;

It is convenient to install and maintain;

Rapidly discharging;

Even particle size of product, little over grinding.

【Product Structure】

Rod Mill

Click Image to Zoom

(1) Rod mill is usually selected in order to prevent over grinding in gravity or magnetic separation plant of tungsten tin and other rare metals mine; (2) In two stages grinding, the capacity of rod mill machine used in the first stage grinding is larger than ball mill’s; (3) In some cases, rod mill can replace short head cone crusher.

【Technical Parameters】

Model	Cylinder Diameter (mm)	Cylinder Length (mm)	Motor Model	Motor Power (kW)	Motor Revolution (r/min)	Length (mm)	Width (mm)	Height (mm)	Capacity (t/h)	Effective Volume (m3)	Weight (kg)
MBY0918	900	1800	Y225M-8	22	730	4980	2370	2020	0.62~3.2	0.9	5700
MBYg0924	900	2400	Y225M-8	22	730	5001	1865	1400	0.81~4.3	1.2	6443
MBY1224	1200	2400	Y280M-8	45	730	6450	2800	2500	0.4 ~4.9	2.28	12308
MBY1530	1500	3000	JR125-8	95	725	7935	3185	2280	0.4 ~4.9	5	19990
MBYg1530	1500	3000	JR117-8	80	725	7253	3070	2280	2.4 ~7.5	5	21210
MBYg2130	2100	3000	JR136-8	180	735	8122	4220	3073	14 ~35	9	42123.5
MBYg2136	2100	3600	JR137-8	210	735	8958	4320	3025	43 ~61	10.8	45800.5
MBYg2430	2400	3000	JR138-8	280	735	9004.5	4836.4	3490		11.5	55795
MBYg2732	2700	3200	JR157-8	320	750	10509	5000	3620		15.7	83110
MBYg2736	2700	3600	JR1510-8	380	743	10764	5150	3620	32 ~86	17.7	90441
MBY2740	2700	4000	TDMK400-32	400	187.5	12300	5700	4700	43~110	20.4	75000
MBY3040	3000	4000	JR1510-8	570	740	9800	3900	3900	54~135	26	90000
MBY3245	3200	4500	TDMK800-36	800	167	14600	7000	5300	64~180	31	113000
MBY3645	3600	4500	TDMK1250-40	1250	150	15200	8800	6800	80~230	41.8	139000
MBY3654	3600	5400	TDMK1600-40	1600	150	15900	8800	6800	100~250	49.7	150000

【Successful case】

In an abroad dressing plant, the discharge of grinding system contained water and mud, the particle size difference is too big. Under the condition of one stage one opened circuit, the grinding efficiency is lower and the material quality is poor, which far from intended goal, therefore, the owner chose Xinhai wet rod mill, the rod mill has a small conical cap curvature, which make the steel rod takes regular movement in mill, the grinding particle size is more uniform. Finally, this rod mill solved above problems, finishing the mineral processing work in a given time.